Packing the inner bed seemed relatively complicated, but in the end it turned out to be quite simple, I would have had problems with the tent if I was alone, but I’ll come back to that later. To fold the bed, you must first fold the backrests of the rear seats and push the front seats with the backrests folded as far as possible. Next, we fold the wooden frame that holds the upper fibers of the bed, and then fold the fibers over it. After that, all we have to do is place the mattress on it, and the bed is already ready.
What you should be prepared for is that there will not be much space between the mattress and the top of the car, about 65 cm, so you will not be able to sit down, and people with claustrophobia may have some problems. Another thing that’s not as lucky is the seat backs of the front seats, which make it impossible to fit them behind the wheel. Why is this a problem if we still want to sleep in the car? Well, imagine it gets really cold at night and they want to warm it up a little. Or, for some reason, they simply need to get away from that site quickly; It will be difficult with an unmade bed. On the other hand, I understand that, for some reason, there isn’t enough space in the Jogger to fit a double bed without moving the front seats. It is just over 1 meter wide, 1.9 meters long, and has a load capacity of 180 kg. After assembling the bed, they can also install blackout curtains on the windows, so they can be sure that the sun will not shine in the morning. So we’ll be done with the pension, but what about the kids?
